The Polypool panel is produced using our up-to-the-minute injection machining process.

A combination of chemicals are mixed to produce the resin component Isofoam which is then heated to an ambient temperature of around 22C and then injected under pressure in between steel sheets within a mould.


Isofoam RM DP6312ZM is the resin component of a two part, MDI based system for producing rigid foam by pour in place or moulded techniques. Designed for use on both high and low-pressure dispensing equipment.


Isofoam RM DP6312ZM was specially formulated to produce rigid polyurethane (PUR) foam for use on high or low pressure machines.